Extron electronic MPX 866 A Switch User Manual


  Open as PDF
of 19
 
NOTE: X! = Input number 00 – maximum number of inputs for your configuration (00 = untied)
X@ = Output number 01 – 12
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Create ties
NOTES: • Videotiescannotbemadebetweenthecomputervideogroupandthelowresolutionvideogroup.
•Audiotiescanonlybemadetothecomputer/audiooutputgroup(outputs1through6).
•Videoandaudiotiesbetweenthelowresolutionvideoinputgroupandthelowresolutionvideooputputgroupare
alwaysmadewiththeaudioredirected.Insuchanoperation,theswitcherautomtaticallytiestheaudotoanoutputinthe
computer/audiooutputsgroup(outputs1through6)asfollows:
� Ifvideoistiedtooutput7,audioistiedtooutput1. � Ifvideoistiedtooutput10,audioistiedtooutput4.
� Ifvideoistiedtooutput8,audioistiedtooutput2. � Ifvideoistiedtooutput11,audioistiedtooutput5.
� Ifvideoistiedtooutput9,audioistiedtooutput3. � Ifvideoistiedtooutput12,audioistiedtooutput6.
•Commandscanbeenteredback-to-backinastring,withnospaces.Forexample:
1*1!02*02&003*003%.
•Thematrixswitcherssupport1-,2-,and3-digitnumericentries(1*1!,02*02&,or003*003%).
•Thethe& tiecommandforRGBandthe% tiecommandforvideocanbeusedinterchangeably.
•The& read tiecommandforRGBandthe% read tiecommandforvideocanbeusedinterchangeably.
Tieinput
X! to output X@
,
videoandaudio
X!
*
X@
! Out
X@
•In
X!
•All
]
(within computer video group)
— or —
Qik
]
(within low resolution video group [because of audio redirection])
Tieinput
X!
videoandaudiotooutput
X@
.
Example 1 (see Notes, above):
Example 2:
1*3!
11*9!
Out03•In01•All
]
Qik
]
Tieinput1videoandaudiotooutput3.
Tieinput11videoandaudiotooutput9.
Command/Response Table for SIS Commands
15MPX 866 A • Remote Control
 previous next