Extron electronic MPX 866 A Switch User Manual


 
Front Panel Operations
In this chapter, = lit, = unlit, and = blinking.
Creating a Tie
NOTES: • Whencreatingvideoandaudiotiesinthelow
resolutionvideogroup,audiomustberedirected
(tiedtoadifferent,butcorresponding,outputthan
thevideo)becausethereareonlyaudiooutputs
1through6.Inthiscase,theaudioistiedtoan
outputinthecomputervideo/audiogroup.
• Ifthevideoistiedtooutput7,theaudioistied
tooutput1.
• Ifthevideoistiedtooutput8,theaudioistied
tooutput2.
• Ifthevideoistiedtooutput9,theaudioistied
tooutput3.
• Ifthevideoistiedtooutput10,theaudioistied
tooutput4.
• Ifthevideoistiedtooutput11,theaudioistied
tooutput5.
• Ifthevideoistiedtooutput12,theaudioistied
tooutput6.
• Ifyouselectaninputinthelowresolutionvideo
inputgroup(inputs9through14),youcanonly
selectoutputsinthelowresolutionvideooutput
group(outputs7through12).Theswitcher
automaticallyredirectstheaudio.Thisrestriction
appliestotyinganduntying.
Creating a Tie in the Computer Video Group
1. PressandreleasetheEscbuttontoclearanyinputLED,output
LED,orcontrolLEDsthatmaybelit.
2. PressandreleasetheVideoand/orAudioI/Obutton(s)toselector
deselectvideoand/oraudioasdesired.
VIDEO AUDIO
Lit when selected
Off when deselected
Lit when selected
Off when deselected
NOTE: Audio(RS-232)orvideocanbebrokenaway(tiedby
itself)byselectingonlytheVideobuttonoronlythe
Audiobutton.
MPX 866 A • Front Panel Operations 76 MPX 866 A • Installation