Filter
Top Products
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Front panel locks (Executive modes)
NOTE: See "Setting the Front Panel Front Panel Locks (Executive Modes)" on page 11 for more detailed descriptions of the lock modes.
Lock all front panel functions
1X
Exe1
]
Enable Lock mode 1.
Lock advanced front panel
functions
2X
Exe2
]
Enable Lock mode 2.
Unlock all front panel functions
0X
Exe0
]
Enable Lock mode 0.
View lock status
X
X1!]
Information requests
Information request
I
V14X12•A14X12
]
V14X12 is the video matrix size.
A14X12 is the audio matrix size.
Request part number
N
60-825-01
]
Query controller firmware
version
Q
X1@]
Example:
Q
1.23
]
The factory-installed controller firmware
version is 1.23 (sample value only).
NOTE: X1! = Lock mode 0, 1, or 2
X1@ = Firmware version number to second decimal place (x.xx)
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
IP setup
Set IP address
EX1#
CI
}
Ipi
X1#]
Read IP address
E
CI
} X1#]
Set subnet mask
EX1#
CS
}
Ips
X1#]
Read subnet mask
E
CS
} X1#]
Set gateway IP address
EX1#
CG
}
Ipg
X1#]
Read gateway IP address
E
CG
} X1#]
Set DHCP on or off
EX1$
DH
}
Idh
X1$]
Read DHCP on/off status
E
DH
} X1$]
Set verbose mode
EX1%
CV
}
Vrb
X1%]
Read verbose mode
E
CV
} X1%]
Configure current port timeout
E
0*
X1^
TC
}
Pti0*
X1^]
Read current port timeout
E
0TC
} X1^]
Configure global IP port timeout
E
1*
X1^
TC
}
Pti1*
X1^]
Read global IP port timeout
E
1TC
} X1^]
NOTE: X1# = IP address ###.###.###.###
X1$ = DHCP 0 = off 1 = on
X1% = Verbose mode 0 = clear/none (default for Telnet connection)
1 = verbose mode (default for RS-232/RS-422 connection)
2 = tagged responses for queries
3 = verbose mode and tagged for queries
X1^ = Port timeout interval 1 (= 10 seconds) - 65000 (default is 30 = 300 seconds = 5 minutes)
20 MPX 866 A • Remote Control 21MPX 866 A • Remote Control