Filter
Top Products
6. After verifying that the IP address change was successful, enter
and issue the “arp –d” command at the DOS prompt. For example:
arp –d 10.13.197.7 removes 10.13.197.7 from the ARP table
or
arp –d* removes all static IP addresses from the ARP table.
Loading the Start-up Page
NOTES: • If your Ethernet connection to the matrix switcher
is unstable, try turning off the proxy server in your
web browser. In Microsoft Internet Explorer, click
Tools > Internet Options > Connections > LAN
Settings, uncheck the Use a proxy server...
box, and then click OK.
• For details on operating the switcher via HTML pages,
see the "HTML Operation" section in the MPX 866 A
User Guide.
1. Start the web browser program.
2. Click in the Address field.
3. Enter the Matrix IP address in the Address field.
NOTE: 192.168.254.254 is the factory-specified default value
for this field.
4. Press the keyboard <Enter> key. The switcher checks whether it is
password-protected.
If the switcher is not password-protected, it checks and
downloads the HTML start-up page. The switcher is ready for
operation via HTML remote control.
If the switcher is password-protected, it downloads the Enter
Network Password page.
NOTE: A User name entry is not required.
5. Enter the appropriate administrator or user password in the
Password field and click OK.
6. The switcher downloads the HTML start-up page, shown below.
The switcher is ready for operation via HTML remote control.
26 MPX 866 A • Remote Control 27MPX 866 A • Remote Control