Filter
Top Products
2-3QSD 204 • Installation and Operation
Under-furniture mounting
For under-tabletop or under-desktop placement (see illustration below), install
the optional under-furniture mounting kit (part #70-219-01), as follows:
Mounting the QSD 204 on the underside of furniture
1. Attach the mounting brackets to the QSD 204 decoder using the
decoder’s existing top cover screws. See the above illustration.
2. Place the decoder against the underside of the furniture, then mark the
location of the bracket screw holes on the mounting surface.
3. Drill 3/32” (2 mm) diameter pilot holes, 1/4” (6.3 mm) deep into the
marked bracket screw holes on the furniture mounting surface.
4. Insert the four #8 wood screws into the four pilot holes. Tighten each
screw into the mounting surface until about 1/4” of the screw head
still protrudes from the mounting surface.
5. Align the mounting screws with the slots in the brackets and place the
decoder flush against the mounting surface. Position the decoder
forwards or backwards in the bracket slots, then tighten the four
screws.
1
QSD 204
DIGITA
L QUAD-STANDARD DE
CODER
2
3
4
BRT/
CONT
COL/
TNT
BLANKING
CENTER
MENU
NEXT
ADJUST
Under-Desk
Mounting Bracket
(4) #8 Wood screws
Remove and Reinstall
(4) Screws from Top