Falcon XG3K-1T Power Supply User Manual


 
3
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
RETAIN THIS USER MANUAL
This manual contains important instructions which must be followed during the installation,
operation and maintenance of this UPS and its batteries. Please read all instructions before
operating this equipment and save this manual for future reference.
All of the models presented herein are designed for installation and use in a temperature
controlled environment, free of contamination.
This UPS operates from utility power and contains a number of high current back-up batteries,
this information is important to all personnel involved. Please read this manual first before
continuing to unpack, installation and operation of this UPS.
STORAGE AND TRANSPORTATION
This UPS must be handled with care and given special attention due to the high energy stored
within its internal sealed lead acid batteries. The shipping container should be retained in the
event the UPS needs to be returned for service.
INSTALLATION
Install this UPS in a clean environment, free from moisture, flammable gases or fumes and
corrective substances. Operate the UPS in an indoor environment with an ambient
temperature range of 32
o
F to +104
o
F (0
o
C to +40
o
C).
This UPS is designed for scientific and data processing equipment. It is not intended for use
with life support and other designated “life-critical” applications.
The maximum UPS output load must not exceed that shown on the UPS rating label. DO NOT
CONNECT equipment that could overload the UPS or demand half-wave rectification from the
UPS, for example: electric drills, vacuum cleaners or hairdryers.
Storing magnetic media on top of the UPS may result in data loss or corruption.
Warning
This UPS should be installed according to the instructions in this manual. Failure to do so
could result in unsafe operation and could invalidate your warranty.
BATTERY
Once batteries have reached the end of their life, ensure they are disposed properly. REFER
TO YOUR LOCAL LAWS AND REGULATIONS FOR BATTERY RECYCLING REQUIREMENTS.