Filter
Top Products
RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
11-16
Inhibit Bitmap File Placement Examples
For example placing a “~iC:\Test\inhibit.bmp” text object within a Corel Draw print job against
a local HDPii printer instance under Windows XP causes the printer driver to look for a file
with that name and location on the local workstation.
The location of the inhibit area within the print job is the upper left hand corner of the page
where the TextOut string is placed upon the drawing within the application.
Inhibit Bitmap File Description
The inhibit bitmap file must contain one bit per pixel (e.g., Monochrome) at 300 dots per inch.
If the inhibit bitmap is larger than the page size it is trimmed to fit.
• The normal print size for a HDPii CR-80 card is 2.204 by 3.452 inches.
• With that print size, the maximum size of the inhibit bitmap area would be 661 by 1035
pixels. Black pixels within the image file produce an inhibit covering on the card.