Filter
Top Products
FS-8700-47 DNP 3.0 Driver Manual Page 11 of 51
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
Column Title Function Legal Values
DnpAssociate*
When class data is requested the DNP device
responds with data of multiple types and
variations in one message. One Map
Descriptor is used per data type - this
parameter is used to link these Map
Descriptors.
Non-zero positive integers.
DnpMultiMsg*
This parameter is used to produce a single
message with a request for multiple object
types. Assign positive whole numbers to
associate Map Descriptors for this purpose. All
Map Descriptors whose dnpMultiMsg values
are equal will be requested in a single poll.
Ensure only one is active (rdbc for example)
and all the others have the function set to
'Server'. Refer also to Appendix A.20
0,
positive whole numbers.
By default Map Descriptors
are not associated with each
other. The default value of
zero ensures no association.
4.4.3. Timing Parameters
Column Title Function Legal Values
Scan_Interval Rate at which data is polled >0.1s