Filter
Top Products
FS-8700-47 DNP 3.0 Driver Manual Page 17 of 51
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
5.2. Server Side Node Descriptors
Section Title
Nodes
Column Title Function Legal Values
Node_Name Provide name for node
Up to 32
alphanumeric
characters
Node_ID DNP 3.0 station address of physical Server node 0-65535
Protocol Specify protocol used DNP
Class_Data_Serving_Ctr*l
This parameter can be specified to configure the
Server to serve changed data only. Refer to
Example 5.3.8 for more information.
Class0; Class1;
Class2; Class3;
Static
Server_II_Array
The name of a Data Array that has previously
been defined in the configuration in the Data
Arrays section. Refer to Error! Reference
source not found..
Max 15 characters
Example
// Server Side Nodes
Nodes
Node_Name
,Node_ID
,
Protocol
FieldServer ,11 ,DNP
5.3. Server Side Map Descriptors
5.3.1. FieldServer Specific Map Descriptor Parameters
Column Title Function Legal Values
Map_Descriptor_Name
Name of this Map
Descriptor
Up to 32 alphanumeric characters
Data_Array_Name
Name of Data Array
where data is to be
stored in the
FieldServer
One of the Data Array names from “Data
Array” section above
Data_Array_Offset
Starting location in Data
Array
0 to maximum specified in “Data Array”
section above
Function
Function of Client Map
Descriptor
Generally for Server side nodes you will
use the PASSIVE function. The WRBX
function may be used to generate
unsolicited messages.