Filter
Top Products
FS-8700-47 DNP 3.0 Driver Manual Page 16 of 51
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
5. Configuring the FieldServer as a DNP 3.0 Driver Server
For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration
Manual. The information that follows describes how to expand upon the factory defaults provided in the
configuration files included with the FieldServer (See “.csv” files provided with the FieldServer.)
This section documents and describes the parameters necessary for configuring the FieldServer to
communicate with a DNP 3.0 Driver Client.
The configuration file tells the FieldServer about its interfaces, and the routing of data required. In order
to enable the FieldServer for DNP 3.0 Driver communications, the driver independent FieldServer buffers
need to be declared in the “Data Arrays” section, the FieldServer virtual node(s) needs to be declared in
the “Server Side Nodes” section, and the data to be provided to the Clients needs to be mapped in the
“Server Side Map Descriptors” section. Details on how to do this can be found below.
Note that in the tables, * indicates an optional parameter, with the bold legal value being the default.
5.1. Server Side Connection Descriptors
Section Title
Connections
Column Title Function Legal Values
Port
Specify which port the device is connected to the
FieldServer
P1-P8, R1-R2
2
Baud* Specify baud rate
110 – 115200, standard baud
rates only
Parity* Specify parity
Even, Odd, None, Mark, Space
Data_Bits*
Specify data bits
7, 8
Stop_Bits*
Specify stop bits
1
Protocol
Specify protocol used DNP
Handshaking*
Specify hardware handshaking
None
Example
// Server Side Connections
Connections
Port ,Baud
,Parity
,Protocol ,Handshaking
P8 ,9600 ,None ,DNP ,None
2
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware.