Filter
Top Products
54
Chapter 4 Controlling the Projector
Save Actual Adjustment
This function is to save and load the control values of the projector. The
storable control items are Input, PC, System, Image and Screen controls,
and these control items differ from each selected input mode and functions
of the projector you use.
1 Adjust and set the controls
Set the controls properly according to the selected source. (see pages 41-47 for
further adjustment)
2 Select the Save page
Click on the Save icon from the control
menu. The setting page is displayed as
the right. Change pages by clicking on
the page numbers “1” to “8” linked
text and check the current settings.
For further information please see the
next page.
3 Name the current setting
Select a set number (Set1 to set10)
you intend to store current settings
with the pull-down menu button of the
Save Setting No.: Save to. Name this set number onto the Memo text area.
4 Save the current setting
Click Set button to store the current setting and name into the selected set num-
ber.
Select a set
number
Type a memo for the
selected set number
✐ You can store up to 10 sets of controls into the network unit.