Filter
Top Products
30
To perform an incremental backup:
1. Click the Backup Drive button in the toolbar on the main window, or select “Backup Drive”
under the Drive menu, or right-click the freeStor SBC icon in the Taskbar and select “Backup
Drive”.
2. In the Backup Drive screen (Figure 39), select the local partition(s) that you would like to
back up in the top window, and select the freeStor 210/310 drive to use under Destination
Disk. Click “Next”.
3. On the next screen (Figure 54), select the drives to back up, the Destination Disk to back up
to, and select “Incremental” under Backup Mode.
Figure 54: Selecting Incremental Mode
4. If there are not enough partitions on the drive, the Prepare Backup Disk wizard will run.
Refer to the Full Backup section for details on using the wizard. Note that the Prepare
Backup Disk wizard will format the Full Backup partition as well, so you will have to perform
a Full Backup again.