Filter
Top Products
6
Figure 10: Adjusting the Connectors
7. Insert the tray back into the enclosure (Figure 11).
Figure 11: Inserting the Tray
8. Screw the two screws back into the enclosure (Figure 6).
9. Connect one end of the included USB cable to the freeStor Mini 310, and connect the other
end to a USB port on your computer. Then connect the power cord from the unit to a power
outlet (Figure 12).
Figure 12: Connecting the Cables
10. Turn on the freeStor Mini 310.
2.3 Disconnecting the freeStor Mini 210/310
To disconnect the freeStor Mini 210/310 from your computer, follow these steps:
1. Click on Safely Remove Hardware icon in the system toolbar (
).
2. Click on the USB Mass Storage Device icon to remove and click “Stop”.
3. If you are using a freeStor Mini 310, power off the device using the power switch.
4. Unplug the USB cable from the computer.