![](http://pdfasset.owneriq.net/6/ba/6bab0dbf-5117-4aa9-9d6d-d724c51b85ad/6bab0dbf-5117-4aa9-9d6d-d724c51b85ad-bg1be.png)
HCS08 Full Chip Simulation
Peripheral Modules Commands
446
Microcontrollers Debugger Manual
INPUT<x> Command
The INPUT<x> command sets the simulated inputs to port <x>. The CPU reads this
input value when port <x> is set as an input port.
Syntax
>INPUT<x> <n>
Where:
<x> is the letter representing corresponding port
<n> Eight-bit simulated value for port <x>
Example
>INPUTA AA
Simulate the input AA on port A.