Filter
Top Products
6
2. Main Menu Screen 6-33
POD Operations
Set the IP address on the Main Menu screen.
1. Press the [Ethernet] switch on the Main Menu screen to bring up the Ethernet screen.
2. Change the switch on the screen into [Select IP Address from Network Table.].
3. Select the desired IP address by changing the network table number.
4. Press the [Setting Finished] switch to move back to the Ethernet screen.
Setting 3
Set the IP address on the editor.
1. On the editor, chick [System Setting], [Unit Setting] and [IP Address Setting]. The [IP Address
Setting] dialog is displayed.
2. Check [ IP Setting].
3. Set the following options.
• IP Address
• Default Gateway
• Sub Net Mask
• Port No.
• Send Timeout
• Memory Protect
4. Click the [OK] button and transfer the screen data. The IP address set above can be checked on
the “Ethernet Information” screen to be displayed from the Main Menu screen.