Filter
Top Products
22
■ Removing the upper cover
When installing internal options, remove the upper cover so as to reveal the inside of the main
unit.
1
Remove three screws at the rear of the PC
main unit.
2
Remove the upper cover.
Slide the upper cover to the rear of the PC main
unit (in the direction of arrow
1
in the figure)
Lift and remove the cover (in the direction of
arrow
2
in the figure).
Point
- To replace the cover, reverse the above procedure.
- If the upper cover of the PC main unit is left removed, the internal battery life will shorten. Keep
the duration when the upper cover is left removed at minimum requirement such as only for
installing internal options.
■ Removing the front panel
Remove the front panel when installing internal options in file bays. (Removal of the front panel is
not required when installing a hard disk in a 3.5-inch file bay.)
1
Release hooks in order from
1
to
4
and
pull out the front panel.
Point
To attach the front panel, secure the hooks in order from
1
to
4
in the figure.
2
1
1
2
4
3