Filter
Top Products
47
6 Install the expansion card mounting bracket.
Secure the bracket with the four screws removed in Step 3.
7 Reinstall the upper cover.
Point
For removal, follow the opposite procedure from that for installation.
8 Turn on the PC.
For Windows 95/98/2000/Me model
The system configures the device driver and resource to enable the expansion card.
Point
The device drivers automatically selected by Plug & Play are those included in Windows 98/2000/
Me. The device drivers for some expansion cards or peripheral devices may not be included in
these operating systems. If so, prepare a floppy disk containing the device driver supplied with
the expansion card, and install it following the messages.
Before using the installed expansion card, use Device Manager to check whether the device driver
is installed. If not, delete the device driver and then reboot Windows 98/2000/Me.
For Windows NT model
Configure the device driver for the expansion card.
Refer to the manual for the expansion card. Once the device driver is configured, the expansion
card is enabled.