Filter
Top Products
59
■ USB keyboard (Windows 98 model)
After selecting [Control Panel]-[Accessibility Options]-[FilterKeys]-[Settings] and enabling [Use
Shortcut], the shortcut key function is disabled and [Use FilterKeys] is not set even after the [Right
Shift] key has been pressed for 8 or more seconds.
In this case, use the mouse to set the [Use FilterKeys] checkbox.
■ Addition of LAN adapter
When this PC is operated as a client and a LAN adapter is added, the adapter cannot be used
simultaneously with the standard LAN function.
■ Wake up On LAN
By setting [Power-saving settings]-[Auto Wake up]-[Wake up On LAN] of BIOS Setup to [Enabled],
the PC can be turned on via LAN (WOL: Wake up On LAN).
■ Precautions on using display
● Depending on the setting of the display used (ex. resolution), the thicknesses of the vertical
and horizontal lines may seem to be different on CAD or other application. If such difference
is detected, adjust the setting.
● Although the screen may be distorted temporarily or display horizontal lines at the beginning
of a screen display (such as the Windows startup and shutdown screen) or when the display
mode is changed (for example, from the power-saving mode to the normal mode), this does
not indicate a fault.
■ Precautions on using analog LCD
On some analog LCDs, the screen may appear to be doubled or tripled. In this case, set the refresh
rate to 60Hz.
■ Adjustment of analog display screen position
For an analog display, the BIOS Setup or MS-DOS screen may be displayed in a wrong position
on the 640 x 480 (60Hz) Windows screen after the position is adjusted using the display. In this
case, adjust the position on each screen.
■ Display of video memory capacity
Although the video memory capacity is not displayed correctly in [Display Properties], it should
not be considered faulty.
■ Connection of display
If the screen is not centered on the connected display, check if the screen frequency is set in
accordance with the display. In the case that the screen is not centered even though the frequency
is proper, adjust it using the display.