Filter
Top Products
60
■ Replacement of display
If the display is replaced with a different type (especially with an LCD), a display error such as a
blank screen may occur. In this case, replace the display as follows:
For Windows 95/98/Me model
1 Set the resolution to 640 x 480 (the setting before replacement).
2 Set the refresh rate to “Adapter default” or “Adapter standard”.
3 Close Windows, turn the PC unit off, and replace the display.
If nothing appears or some resolutions are unavailable after the display is replaced without the
above setting, reinstall the display driver as follows:
1 Start Windows in the Safe mode.
2 Set the graphic adapter to “Standard VGA” and restart Windows.
3 Reinstall the display driver.
For Windows NT model
1 Turn the PC off and replace the display.
2 Start the PC with Windows NT Workstation Version 4.00 [VGA mode].
3 Set the resolution, number of colors, and refresh rate in accordance with the display
specifications, and restart the PC.
For Windows 2000 model
1 Set the resolution to 640 x 480.
2 Set the refresh rate to 60Hz.
3 Close Windows, turn the PC unit off, and replace the display.
If nothing appears or some resolutions are unavailable after the display is replaced without the
above setting, reinstall the display driver as follows:
1 Start Windows with “VGA mode” enabled.
2 Reinstall the display driver.