Filter
Top Products
56
■ Cleaning of the floppy disk drive
The floppy disk drive head (the component to read and write data) becomes dirty after used for
extended periods. A dirty head prevents proper reading from or writing to a floppy disk. Using a
cleaning floppy disk to clean the floppy drive when your drive dirty.
The method of cleaning varies depending on the OS used.
Windows 98/Me/2000/NT models
1 Insert a cleaning floppy disk into the floppy disk drive.
2 At the command prompt (Windows 2000/NT) or MS-DOS prompt (Windows Me), run
the dir or other commands that access the disk.
Example: Enter a command as shown below and press the [Enter] key.
dir a:
3 Confirm that the Floppy disk access lamp is off, then remove the cleaning floppy disk.