Filter
Top Products
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU’S PRIOR WRITTEN CONSENT.
Overview Chapter 1 - Overview
Revision 1.0 - March 6, 2012 AIO Peripherals - 11
1.2.12 LEDs and Buttons
The LED and button locations on the OP (operations) panel are indicated below. (Open the
panel cover door to access the controls and LEDs.)
See the table on the following page for additional details.
ON/OFF Switch
USB Port
Reset Switch
HDD/SDD Activity
5V Standby
Unused
HDD1/SSD1 Diagnostic
HDD2/SSD2 Diagnostic
Fan Diagnostic (all models except A100)
Memory Diagnostic
Blue LED
power indicator
Volume Down
Volume Up
Brightness Down
Brightness Up
Label inside panel cover: