Filter
Top Products
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU’S PRIOR WRITTEN CONSENT.
TeamPoS7000_User Guide_D900000454.pdf Chapter 3 - Basic Operations
Revision 1.0 - March 6, 2012 Using the (Optional) MSR - 23
3.5 Using the (Optional) MSR
The magnetic card reader reads information written on the magnetic stripe of a magnetic card.
NOTE:
• Use only the specified magnetic card reader.
• Keep magnetic stripes clean. If a magnetic stripe is contaminated with dust, oil or water, this
may cause an error, result in a magnetic head fault, or degrade the performance of the
magnetic head.
• Do not lubricate the magnetic card reader.
• If anything falls into the slot, use tweezers to remove it.
Data corruption:
Do not expose the magnetic card reader to strong magnetic fields, otherwise
the data may be lost.
1. Slide a magnetic card through the slot on the right side. Hold the card lightly, and slide it in
the slot on the right side, paying attention to the direction of the arrow.
2. Move the magnetic stripe card in the direction of the arrow. Move the magnetic card from
the far end of the slot to the front.
NOTE: The MSR reader may not be able to read the magnetic stripe card
correctly if the movement of the card is stopped midway, if the card is
not moved at a constant speed, or if the card is not moved parallel to
the slot.