Fujitsu 8.4 Scanner User Manual


 
100
Imprinter (Endorser): With endorser option
(Reverse side, minimum left margin printing position of 20 mm)
1
Maximum number of characters to be printed: 30 characters
Counter display range: 0 to 65535 (at 5 digits display)
0 to 16777215 (at 8 digits display)
(There is partly limitations by the revision of the scanner device.)
Direction(Printing): Top to Bottom
Interface: SCSI-II
Online offset adjustment: Enabled
Job control: Enabled
Automatic skew compensation: Enabled
Drop out: Enabled
Double feed detection: Enabled
Buffer scan (cache using scanner memory) function: Enabled
Blank page skip: Enabled (only when scanner memory is used)
Use of FUJITSU Scanner Control Center: Enabled
1
If 0 mm is specified as the endorser print position, printing will begin 20 mm from the edge of the page.