Filter
Top Products
30
4.7.4 Imprinter (Endorser)
Figure Option dialog (Imprinter)
♦ Enable Imprinter (Endorser)
Specifies enabling or disabling the imprinter function of the device.
When the option is selected and scanning has been completed, the scanned originals are
imprinted according to the instructions below. This applies only to the imprinter option.
Therefore, the function is supported only in devices in which the imprinter option can be
installed. See "Relevant Image Scanner Specification" described in the Appendix.
♦ Y Offset (Printing)
Specifies Y Offset from the edge of the original for the placement of printing. See "Relevant
Image Scanner Specification" in the Appendix because the standard value specified here
depends on the device.
♦ Direction (Printing)
Specifies the printing direction of endorsement strings. When printing from the head of
strings against to the direction of scanning, designate “Top to Bottom”. And when printing