Filter
Top Products
59
♦
[Use Plug-In]
Checking this check box specifies a plug-in.
(A plug-in is an additional program for adding a new function to the application.)
♦
[Setting]
Sets a plug-in in accordance with the following procedure:
•
Pressing the [Setting] button after selecting a target plug-in name in the plug-in list
displayed displays the plug-in setting screen.
•
Pressing the [OK] button after setting each item reflects the settings for the application
to be started.
♦
[Install]
A new plug-in can be installed.
Press the [Install] button and specify a file of the plug-in to be installed. A new plug-in is
registered in the list.
* Up to 50 plug-ins can be registered.
<<Setting the Start button>>
If the scanner being monitored has function keys, it is necessary to assign a function key to the
start button in advance.
If no function key has been assigned to the start button, a dialog box for determining whether to
set the start button is displayed when the dialog box is displayed after selecting [Option] on the
pop-up menu.