Filter
Top Products
72
8. Appendix
8.1 Relevant Image Scanner Specification
Product: M3093GX
1
(device name: fi-4320S)
Type: Desktop
Image sensor: Reduced optical system
Operating method: Document fixed, scanner unit moving (flat bed),
Automatic Document Feeder (ADF)
Light source: Xe discharge tube (Green)
Basic resolution: Horizontal scanning: 400 dpi
Vertical scanning:400, 300, 240, 200 dpi
Output resolution: Standard: 400, 300, 240, 200 dpi
With image processing option: 50 dpi to 800 dpi (at steps of 1 dpi)
Grayscale levels (internal): 8 bit 256 levels
Grayscale output: Enabled (8 bits)
Halftone Patterns: Dither matrix (can be downloaded), Error diffusion
Scanning speed: 1.6 sec or less (A4, 200 dpi)
ADF scanning speed
2:
27 pages/minute (200 dpi, A4, 55 kg)
ADF stacker capacity: Maximum 50 sheets, ream weight: 55kg, A4
Document size
3:
Maximum 216 mm
×
356 mm Legal size paper
Supported regular paper: A4, A5/A5 Landscape, A6/A6 Landscape, B5, B6/B6 Landscape,
Letter, Legal, US Executive
Isolation specification: Specified (one location)
Background compensation: Enabled
Contrast setting: 256 steps
Gamma pattern: 3 internal types (can be downloaded)
Image processing function: Image processing circuit II required,
Outline emphasis, Outline extraction, Automatic separation,
Mirror image, Reverse image, Automatic binarization, Smoothing,
Filtering, Noise removal
Interface: SCSI-II
Job control: Enabled
Use of FUJITSU Scanner Control Center: Disabled
1. Use of this scanner requires that the image compression option board (CMP-2) be installed in the scanner.
2. This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
3. Not all sizes of paper can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.