Filter
Top Products
64
•
Description not specified.
Cause: The description of the setting file has not been specified.
User response: Enter the description of the setting file in the description field. Then,
try scanning again.
•
Filename not specified.
Cause: The filename of the setting file has not been specified.
User response: Enter the filename of the setting file. Then, try scanning again.
•
Specified string is too long.
Cause: The specified string is too long. Up to 128 en-size characters and up
to 64 em-size characters can be specified.
User response: User response: Reduce the number of characters in the string so that
they do not exceed 128 en-size characters. Then, try scanning again.
•
Cannot specify next words for filename. \:;?”<>
|
.
Cause: The specified filename contains one or more of the following
characters: \:;?”<>
|
.
User response: Enter a file name that does not contain the above characters. Then,
make the settings again.
•
The image scanner cannot be found.
Cause: Possible causes include the following: an image scanner that is not
supported by this driver has been connected, no image scanner has
been connected, or the cable is not connected.
Otherwise, the initial values of the image scanner were overwritten
while the driver was open.
User response: Check the connection of the image scanner. Also be sure to close the
driver before using the initial value adjustment utility in the image
scanner.
•
The specified image scanner is being used.
Cause: The image scanner may be already in use by another application, or
the TWAIN driver may have been started twice.
User response: User response: After all applications are terminated, restart the image
scanner for scanning.