STARTERKIT MB91360
Chapter 7 Appendix
UG-910006-13 - 38 - © Fujitsu Microelectronics Europe GmbH
EQUATIONS
; -----------------------------------------------------------------------
; Power-on Indicator (Flip-Flop) :
; -----------------------------------------------------------------------
PONFLAG.CLKF = RESETIN ; Power-on-Flag ist 0 at Pon ; otherwise 1
PONFLAG := 1
; -----------------------------------------------------------------------
; Equations for Modes (Reset-States) :
; -----------------------------------------------------------------------
; --------------------> LEDRED is indicating the Monitor-Reset state, if
LEDRED = USERRES * FLASHRES * /MONRES ; Mon-reset button pressed
+ /DTR ; or uart-reset (DTR line low)
+ (/PONFLAG * /DEFAULT) ; or Power-on (Default-Mode=Mon)
+ /LEDGRN * /LEDYEL ; (hold-condition)
; --------------------> LEDGRN is indicating the User-Reset state, if
LEDGRN = /USERRES * FLASHRES * MONRES ; User-Reset button pressed
+ (A20 * /A19 * /CS2) ; or Remote-User-reset request
+ /LEDYEL * /LEDRED ; (hold-condition)
; --------------------> LEDYEL is indicating the Flash-Reset state, if
LEDYEL = USERRES * /FLASHRES * MONRES ; Flash-Reset button pressed
+ (/PONFLAG * DEFAULT) ; or Power-on (Default-Mode=Flash)
+ /LEDGRN * /LEDRED ; (hold-condition)
MODE = LEDGRN ; Mode-Pin (MD0) is 1, if User-Reset state, otherwise 0
PG5 = LEDYEL ; Flash-Ind-Pin is 1, if Flash-Reset state, otherwise 0
UARTRES = /RESETIN * LEDRED ; UART-reset only if Monitor-Reset
; -----------------------------------------------------------------------
; Reset-Request : Toggles the Masterreset-input (MAX811), if
; -----------------------------------------------------------------------
/MASTRES = ((/MONRES + /USERRES + /FLASHRES) * RESETIN) ; Buttons pressed
+ (( LEDGRN * /A19 * A20 ) * RESETIN) ; or Rem-Request
+ ((/DTR ) * RESETIN) ; or DTR low
; -----------------------------------------------------------------------
; Memory-Mapping Equations :
; -----------------------------------------------------------------------