Filter
Top Products
STARTERKIT MB91360
Chapter 2 Installation
© Fujitsu Microelectronics Europe GmbH - 9 - UG-910006-13
2 Installation
2.1 Hardware Installation
What you’ll need :
< Host : IBM(-comp) PC with Windows 9x or Windows NT ; 1 COM-port
< Power Requirements: A power supply, capable of supporting 9-12V DC at about 500
mA. Note that the power connector must be + at the shield and - in the centre. Power
supplies are available from Fujitsu.
< RS232 : An ‘extension’ (1:1) RS232 cable with DB9 m+f connectors
Connect the power-supply (9-12V DC-input) and the RS232-cable
and switch on the Starterkit.
LED D10 should light up (power-indicator)
and LED D11 flashing (reset indicator).
During the initialization phase
the red monitor LED is on.
After that, a start message from the monitor
(“91360-STARTERKIT MONITOR VxLx”)
will be displayed on the LCD and the green user LED will light up.
The board is now ready to use.