Filter
Top Products
1-4
For details, refer to the "FUJITSU TWAIN32
Scanner Driver User’s Guide", provided in the
Setup CD-ROM, and the "fi-5650C Operator's
guide", provided in the User Manual CD-
ROM.
The following shows the indications on the
Function No. display.
• 8
Blinks only one time upon turning on the scanner.
• P
Indicates that the scanner has been turned ON and is
being initialized.
• 0
Indicates that initialization will soon be completed.
• 1
Indicates that initialization has been completed
successfully.
This status is called "Ready Status".
• U
Indicates that a temporary error (that users can solve)
has occurred during the initialization or scanning of
documents.
"U" and an error number (0, 1, 2, 4) are displayed
alternately. To return the scanner to the ready status
("1"), press the "Scan" or "Send to" button while the
error is indicated.
• E
Indicates that a device alarm (that users cannot solve)
has occurred during the initialization or scanning of
documents.
"E" and an "alarm code" (a number or letter) are
indicated alternately. To return the scanner to the
ready status ("1"), press "Scan" or "Send to" button
while the alarm is indicated.
If this alarm occurs, turn the power off and then on
again. If the alarm is indicated after turning on the
power again, contact an authorized FUJITSU scanner
service provider.
TABLE 4.
Name Function
(1)LED Lights when the scanner
is turned ON.
(2)
Function No. display
Indicates the function No.
and error status.
Buttons (3)
Function
Changes the Function
activated by the Send to
button .
(4) Send to
Launches the linked
application software
(5)Scan
Indications on the
Function No. display