Filter
Top Products
2-3
2.2 Connecting the scanner to
your PC
When running Windows 95 and/or Windows
NT 4.0, connect the scanner to your PC with
the SCSI interface cable. When running Win-
dows 98, Windows Me, Windows 2000 and/or
Windows XP, connect the scanner to your PC
with either the USB or the SCSI interface
cable.
<When leading out the AC cable from the
left side>
Do not lead out the AC cable as shown
below, since the cable cover may pinch and
damage the AC cable.
ATTENTION
Use only the AC cable included the
scanner package.
5.
Connect the AC cable to a power outlet.
ATTENTION
Do not connect both the USB interface
cable and the SCSI cable at the same
time. It is not possible to use the USB
interface with Windows 95 and/or
WindowsNT 4.0.
Connecting the USB Cable
1.
Please connect a USB cable to the
Scanner.
Open the cable cover located below the
ADF paper chute and connect the USB
interface cable to the USB interface
connector.
Once the cable is connected, close the
cable cover.
2.
Please connect the other end of the
cable to your PC.
3.
Turn ON the scanner.
4.
Turn ON your PC.
ATTENTION
Use the USB interface cable provided as
an accessory for the scanner. Operation
with a commercially available USB cable
is not guaranteed. When connecting to a
USB hub, be sure to connect to the hub
nearest your computer (first stage). If
you connect it to a USB hub from the
second stage onwards the scanner may
not operate correctly.