Filter
Top Products
AP-5
There is a shadow on
the leading edge of
the scanned images.
Did you cleaned all of the rollers? Clean all the rollers. For details, refer to "4 DAILY
CARE" of the "fi-5650C Operator's Guide"
Do the documents qualify the
"Document Quality" in "8
DOCUMENT SPECIFICATON
FOR THE ADF" of the "fi-5650C
Operator's Guide"?
Use documents that satisfy the requirements.
Did you adjust the offset? (Starting
position for scanning the document)
For Windows 98, Windows Me, Windows 2000
and Windows XP, adjust the [Sub-scan Setting\ on]
Scanners and Cameras\ in the [Control Panel].
For Windows 95 and Windows NT 4.0, right-click
the Scanner Control Center icon, select [Options] -
[Sub-scan Setting] and adjust the offset. Please
refer to Chapter 7 “Online Setup” of the “fi-5650
Operator's Guide” and adjust the offset from the
Software Operation Panel (online settings).
The ADF makes
strange noises dur-
ing scanning.
Did you install the ADF paper chute
correctly?
Please verify that the ADF paper chute is installed
correctly. For details on the installation of the ADF
paper chute, refer to section 2.1, “Installing the
scanner,” on page 2.
TABLE 1.
Symptom Check this Item Remedy