Filter
Top Products
vii
Do not block the ventilation ports.
Do not block the ventilation
ports. Blocking the ventilation
ports generates heat inside of
scanner, which may results in
fire or scanner failure.
Do not place heavy objects or climb
on top of the scanner.
Do not place heavy objects on
the scanner or use the scanner's
top surface for performing other
work. Improper installation
might cause injuries.
Before moving the scanner,
disconnect the power plug from the
power outlet.
Do not move the scanner with
the power and interface cables
connected as this might damage
the cables, causing fire, electric
shock or injuries.
Before moving the scanner, be
sure to disconnect the power
plug from the power outlet, and
disconnect data cables. Also,
make sure that the floor is free of
obstructions.
Do not use the scanner immediately
after moving it from a cold place into
a warm room.
Do not use the device immedi-
ately after moving it from a cold
place into a warm room. This
may cause condensation, which
might lead to scanning errors.
Let the device dry about one or
two hours before you use it.
Protect the scanner from static
electricity.
Install the scanner away from
strong magnetic fields and other
sources of electronic noise. Also,
protect the scanner from static
electricity as this might cause the
scanner to malfunction.
Do not use aerosol sprays near the
scanner.
Do not use aerosol sprays to
clean the scanner. Aerosol
sprays cause dirt and dust to
enter the scanner, resulting
scanner failure and malfunction.
Avoid any contact when scanner is in
use.
Avoid touching any scanner
mechanism when scanning as
this may cause injuries.
Disconnect the power plug from the
power outlet when the scanner is not
used for a long period of time.
When the scanner is not used for
a long period of time, be sure to
disconnect the power plug from
the power outlet for safety.
Do not install the scanner in the
direct sunlight.
Do not install the scanner in the
direct sunlight or near heating
apparatus. Doing so might cause
excessive heat to build up inside
the scanner, causing fire or scan-
ner trouble. Install the scanner in
a well-ventilated location.
Do not try to move or lift the scanner
alone.
This scanner is heavy (77.2lbs/
35kg). When you carry the scan-
ner, ensure that additional per-
sonnel are used.