Filter
Top Products
10 |
3. Press the [SCAN] button.
Ö Scanning starts.
Ö When the scanning is completed, Adobe Acrobat starts
and displays the scanned images.
HINT
● You can also use another application to display
scanned images.
● Pressing [SCAN] button, the documents are
scanned in the “Duplex” mode.
To scan the document in the Simplex” mode,
change this setting using the ScanSnap Manager
.
● The ScanSnap scanner is able to scan
documents using various settings. Refer to the
“ScanSnap Operator’s Guide” on the
“ScanSnap Setup CD-ROM” to learn more
about scanning documents.
3.4. Scanning with the Carrier Sheet
If you use the Carrier Sheet, you can scan large documents
such as A3/B4/11x17 size documents, and documents of
irregular shapes such as clippings of newspaper.
Here, as an example, this section explains how to scan an
A3-size document.
If you are scanning an A3 document, it is not possible to
load it onto the scanner as it is. Fold the document in half
and scan it following the procedure below.
1. Spread the page to be scanned facing outwards and
fold it in half from the center.
Please fold it neatly so that the folded portion does not
appear puffed.
2. Open the Carrier Sheet and place the folded
document inside.
Align the top of the
document to the top of the
Carrier Sheet, and the
folded portion to the
top-right corner closely.
3. Set the Carrier Sheet onto the scanner.
Place the top of the sheet
with the black & white
printed pattern
downwards, and load the
document in the direction
of the arrow.
If you are using the
Carrier Sheet for
scanning, it is not possible
to scan several sheets
continuously. Please load
the sheets one by one and
scan.
4. Press the [SCAN] button.
Ö
The front and back
image data are set in a
facing-page state and
is output side by side.
HINT
The loading method and ScanSnap Manager’s
settings differ according to the documents to be
scanned. Refer to “ScanSnap Operator’s
Guide” on the “ScanSnap Setup CD-ROM” for
details.
3.5. Scanning Business Cards
1. Select “CardMinder” at [Application:] under the
[Application] tab of the “Scan and Save Settings”
window.
HINT
● When “CardMinder” is selected, only the
[Application] and [Scanning] tabs are
enabled.
● Refer to the “ScanSnap Operator’s
Guide” on the “ScanSnap Setup
CD-ROM” to learn more about the settings.
2. Load the business cards onto the scanner. Adjust the
side guides to the business card width.
3. Press the [SCAN] button.
Ö Scanning starts.
Ö The “CardMinder” window appears and displays the
recognized character data, name, company, and e-mail
address.
S
[SCAN] button
Business card
(Set it face down)
Side guide