Filter
Top Products
12 SPARC Enterprise Mx000 Servers Administration Guide • April 2007
▼ To Log in Initially to the XSCF Console
This procedure can be used for initial login or for lost password access.
1. Log in to the XSCF console with the default login name from a terminal device
connected to the Service Processor
1
. You must have physical access to the system.
You are prompted to toggle the Operator Panel MODE switch (keyswitch) on the
front of the system. The location of the MODE switch on a midrange SPARC
Enterprise Mx000 server is shown in
FIGURE 2-1. The MODE switch on a high-end
SPARC Enterprise Mx000 server is mounted horizontally rather than vertically, as
shown in
FIGURE 2-2. The MODE switch has two positions: Service and Locked.
FIGURE 2-1 Location of the Operator Panel MODE Switch on a Midrange Server
serial port log-in prompt: default
1. Fordetailsonserialportconnections,seetheInstallationGuideforyourserverortheSPARCEnterprise
M4000/M5000/M8000/M9000ServersXSCFUser’sGuide.
LED status indicators
POWER button
MODE switch