Filter
Top Products
32 SPARC Enterprise Mx000 Servers Administration Guide • April 2007
2. Type the shownetwork command:
where -a displays information for all XSCF network interfaces, and interface
displays information for a specific XSCF network interface name, in the format
xscf#x-y.
Command output example for the XSCF Unit #0, LAN#1 is:
▼ To Set the Service Processor Host Name and
DNS Domain Name
1. Log in to the XSCF console with platadm privileges.
2. Type the sethostname command:
a. To set the Service Processor host name:
where xscfu can be xscf#0 (XSCF Unit 0) or xscf#1 (XSCF Unit 1 in a high-end
server); hostname is the host name to be set for the specified Service Processor
(XSCF Unit).
b. To set the Service Processor domain name:
XSCF> shownetwork -a | interface
XSCF> shownetwork xscf#0-lan#1
Link encap:Ethernet HWaddr 00:00:00:12:34:56
inet addr:192.168.10.11 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
...
XSCF> sethostname xscfu hostname
XSCF> sethostname -d domainname