Filter
Top Products
Chapter 3 System Configuration 35
3. Reset the Service Processor with the rebootxscf command to make the settings
effective:
4. To verify the operation, type the showntp command.
▼ To Display the NTP Configuration
1. Log in to the XSCF console.
2. Type the showntp command:
where the -a option displays all the NTP servers configured for use, the -l option
displays time synchronization information, and address is the IP address of an NTP
server to display information for.
▼ To Set the Timezone, Daylight Saving Time,
Date, and Time Locally on the Service Processor
1. Log in to the XSCF console with platadm or fieldeng privileges.
2. Type the settimezone command:
a. To display the timezones that you can set:
XSCF> rebootxscf
XSCF> showntp -a
XSCF> showntp -a | -l | address
XSCF> settimezone -c settz -a