Filter
Top Products
Command Specifications
250 C141-C013
Table 4.49 SEND DIAGNOSTIC command: parameter list configuration
Bit
Byte
7 6 5 4 3 2 1 0
0 Page Code
1 0 0 0 0 0 0 0 0
2 Page Parameter Length (MSB)
3 Page Parameter Length (LSB)
4
Parameter
n
• Page code
This field specifies the code which identifies the type of parameter page
being transferred from the INIT and the operation that should be executed.
The parameter pages which can be specified by the INIT and their functions
are as shown Table 4.50.
Table 4.50 Page code
Page Code (Hex) Function
00 Reports a list of the supported page codes.
3F PHY TEST
40 Logical/Physical Address Conversion
• Page parameter length
This field specifies the byte length of the page parameter after byte 4. The
INIT must specify the same value as the length specified for each of the
parameter pages, which will be explained later.
• Page parameter
This field specifies each of the inherent parameters in each page code.
Depending on the page code, this field may not be necessary (page parameter
length = 0).
~
~
~
~
~
~
Header
Page
Parameter