Filter
Top Products
Parameter Data Format
a. PHY IDENTIFIER
Indicates the reported number for a Primary/Secondary Port.
For a Primary Port, X'00' is set, and for a Secondary Port, X'01' is set.
b. PHY OPERATION CODE
The operation code specified by SMP PHY CONTROL is set.
c. ATTACHED DEVICE TYPE
Indicates the "Device Type" received in the IDENTIFY address frame.
d. NEGOTIATE PHYSICAL LINK RATE
Indicates the physical link rate that has been established through a speed
negotiation sequence.
"8": 1.5 Gbps
"9": 3.0 Gbps
e. ATTACHED SSP INITIATOR PORT
Indicates the SSP INIT received from the INIT with an IDENTIFY address
frame.
f. ATTACHED STP INITIATOR PORT
Indicates the STP INIT received from the INIT with an IDENTIFY address
frame.
g. ATTACHED SMP INITIATOR PORT
Indicates the SMP INIT received from the INIT with an IDENTIFY address
frame.
h. ATTACHED SSP TARGET PORT
Indicates the SSP TARGET received from the INIT with an IDENTIFY
address frame.
i. ATTACHED STP TARGET PORT
Indicates the STP TARGET received from the INIT with an IDENTIFY
address frame.
j. ATTACHED SMP TARGET PORT
Indicates the SMP TARGET received from the INIT with an IDENTIFY
address frame.
314 C141-C013