Filter
Top Products
RX600 S5 Operating Manual 109
CSS components Hot-plug components
8.1.4.1 Identifying the defective CSS component
Ê Open the server (see "Opening/Closing the server" on page 134).
Ê Press the Indicate CSS button on the system board (see Technical Manual
for the system board D2870 on the ServerView Suite DVD 2).
The PRIMERGY Diagnostic LED of the defective CSS component lights up
orange, thereby indicating which CSS component on the system board must
be replaced (see Technical Manual for details).
8.1.4.2 Removing a hot-plug expansion card
Ê If required by the operating system, start the PCI hot-plug software. You will
find information about this in the readme file on the ServerView Suite
DVD 2).
Figure 28: Deactivating, unlocking and removing the board
Ê Deactivate the expansion card using either the relevant PCI hot-plug
software or by pressing the light-pipe switch (1).
Ê Wait until the light-pipe switch (1) no longer lights up.
The slot is now zero potential.
Ê If necessary, remove all cables from the expansion card.
Ê Open the expansion card lock by lifting it up (2).
/
1
0