Filter
Top Products
1. OVERVIEW, SETUP
1-8
1.2.2 Choosing the receive mode
The FAX-30 has three modes: facsimile only, navtex only, and facsimile (timer) &
navtex. Choose desired mode as follows.
1. At the facsimile or navtex standby display, click RX MODE.
WX FAX
NAVTEX
FAX(TIMER) & NAVTEX
OK
RX MODE
< back
RX mode options
2. Click desired receive mode and then click OK.
3. Click “<back” or Back button to return to the top menu.
1.2.3 Logging out
The FAX-30 cannot be accessed simultaneously by multiple PCs or
NavNet/NavNet 3D units. For this reason, log out a PC or NavNet/NavNet 3D
from the FAX-30 when its use is not required.
1. At the facsimile or navtex menu display, click “<Top” to return to the facsimile
receiver top display. (See the illustration at the top of the previous page.)
2. Click LOGOUT to logout the PC or NavNet/NavNet 3D from FAX-30.