Filter
Top Products
30
Automated Setup Codes
Calibrate Compass 47 Hold Down Select Load Button, press and release Deckmount
Button to start Calibration Process
Load Factory Compass 49 Hold Down Select Load Button, press and release Deckmount
Button to reload factory Compass Calibration
Load Factory Pilot 59 Hold down Select Load Button, press and release Deckmount
Button to Reload Factory Pilot Settings
Throttle Speed 24 1 lowest speed, 10 highest speed 5
Throttle Delay 25 1 least delay, 10 most delay 5
Throttle Codes
Tachometer Codes
Setup Action Code # Range of Settings or Responses Default
Stby Safety Monitor 349 2 settings on, off, defaults to on every power up on
Tach on/off 34 2 settings on, off on
Show RPM 36
1000’s blink on up Arrow
Hold Down Select Load Button:
100’s blink on down Arrow
Hydraulic Codes
Reverse Hoses 259 2 settings normal up arrow lit, reverse down arrow lit normal
Special Function Setup Codes
Degrees per Step
6
10 choices/1,2,3,4,5,10,15,30,45,or 90 Degrees 15
Circle Time 7 10 choices/ 1,2,3,4,5,10,,15,30,45,or 90 Minutes 5
Zig-Zag Amplitude 8 10 choices 5 to 50 degrees by 5’s 30
Zig-Zag Period 9 20 choices 1 to 20 minutes by 1’s 3
MOB overshoot 28 1 most overshoot command, 40 most undershoot command 20
Cloverleaf Length 29 500 ft to 1000 ft by 50 ft increments 1000
Search Spacing 249 50 ft to 1000 ft by 50 ft increments 50
Table of Setup Codes
30