Filter
Top Products
36 Faxing a Photo or Document
10. To change the Dial Mode setting, press OK and go to step 11.
To change another Communication setting, press the u or d button, or press
the
2, 3, 4, or 5 key on the numeric keypad, to display one of these options:
■ 2.DRD
■ 3.ECM: On/Off
■ 4.V.34: On/Off
■ 5.Rings to Answer
Then press the OK button.
11. Press the u or d button until the setting option you want is displayed, then
press the
OK button to select it.
12. Repeat steps 10 and 11 to change any other settings. When you’re finished,
press the y
Cancel/Back button to return to the first screen.
Setting Up Your Speed Dial List
You can create a speed dial list of up to 60 fax numbers so you can quickly select
them for faxing. You can also add names to identify the recipients and print the
speed dial list.
1. Press the
Fax button once to enter Fax mode. The
Fax button lights up and you see this display:
2. Press the
Setup button. You see this display:
3. Press the u or d button, or press the
3 key on the
numeric keypad, to display this option:
4. Press the
OK button. You see this display:
5. Press the
OK button again. You see this display:
6. Press the
OK button again. The screen displays
Telephone Number briefly, then goes blank except
for a cursor (
_).
7. Press the keys on the numeric keypad to enter the
fax number of the first speed dial entry. You can
enter the numbers 0 to 9, and the characters * and
#; up to 64 digits total.
Enter Fax Number
1.Select Speed D
3.Speed Dial Set
1.Add Entry
[01]
1234567890