Filter
Top Products
page
44 --
MI00/10056 rev. 8 —05/2006
6.2 Control Panel
Inverter Start Up
This allows the user to turn on and reset the inverter. This is normally only used when starting the UPS.
Inverter Shutdown
The switch incorporates a safety feature to prevent inadvertent operation yet still allow rapid
shutdown in the event of an emergency. This is achieved by the requirement that the switch be depressed
for 2 seconds before the inverter stops during which time the audible alarm will be heard.
Audible Alarm Cancel Switch
This switch cancels the audible alarm. When pressed the red warning light goes from continuous
illumination to flashing on and off.
Page Right Control
This switch changes the page headings displayed on the LCD. It also allows the alarm and measurement
statuses to be stepped through when examining the power history (refer to section 10.6)
Record Up
This switch changes the record displayed on the LCD to the previous message displayed. When the top of
the page has been reached the display will no longer scroll.
Record Down
This switch changes the record displayed on the LCD to the next record on the page. When the bottom
of the page has been reached the display will no longer scroll.