Filter
Top Products
Magnum 8000X Mixed-Media Fiber Hubs Installation and User Guide (05/ 02)
3
www GarrettCom com
..
1.1 Specifications - Port Modules, for front ports of the Magnum 8000X
(For Power Budget data, see Section 4.5)
PM Model # IEEE Standard Speed Connector type -Mode
FPM-MST FX 100Mbps ST “twist-lock” multi-
FPM-MSC FX 100Mbps SC “snap-in” multi-
FPM-SSC FX 100Mbps SC “snap-in” single-
FPM-MTRJ FX 100Mbps MT-RJ “plug-in” multi-
FPM-MV45 FX 100Mbps VF-45 “plug-in” multi-
FPM-SXMST SX 100Mbps ST “twist-lock” multi-
FPM-SXMSC SX 100Mbps SC “snap-in” multi-
FPM10-MST FL 10Mbps ST “twist-lock” multi-
FPM10-MSC FL 10Mbps SC “snap-in” multi-
FPM10-SST FL 10Mbps ST “twist-lock” single-
FPM10-SSC FL 10Mbps SC “snap-in” single-
FPM-MFC FL 10Mbps FC “screw-on” multi-
PM-RJ45 -T, TX 10/100 auto-neg. RJ-45 twisted pair
PM-RJ45U -T, TX 10/100 auto-neg. RJ-45 with up-link sw. TP
PM-BLNK Blank cover for an unused port slot
Two LED indicators per fiber port, in each PM, are “L” for LINK is made, “A” for traffic Activity.
Additional LED for RJ-45 ports are “S” for Speed, where flashing indicates auto-negotiation is
ready (or nothing is connected), steady ON indicates 100Mbps operation and OFF means
10 Mbps
operation has been selected by the last auto-negotiation session.
1.2 Specifications - Switching Port Modules (SPMs) for bonus port
* PDV (path delay value) of an SPM is the same as a user-node i.e. , 50 BT
SPM Type * SPM-TTX SPM-FDSC SPM-FDST SPM-FDSSC
Physical Signaling Type
100BASE-TX
& 10BASE-T
100BASE-FX
mm* f. duplex
100BASE-FX
mm* f. duplex
100BASE-FX
sgl.mode, fdx
Connector Type
RJ-45 Fiber-SC Fiber-ST Fiber-SC
LINK LED
yes yes yes yes
Receive (RX) LED
yes yes yes yes
Up-link switch
yes n.a. n.a n.a.
10/100Mb switch
yes n.a. n.a. n.a.
(For power budget data, see Section 4.5)