Filter
Top Products
Magnum 8000X Mixed-Media Fiber Hubs Installation and User Guide (05/ 02)
43
www GarrettCom com
..
5.2.2a FPM10-MSC, 10 Mbps multi-mode FL-SC-type, “snap-in” connector
The Magnum FPM10-MSC is a multi-mode 10 Mbps fiber optic module
equipped with a dual SC-type connector. It looks the same as the 100Mb FPM-MSC,
but has lettering “10 Mb” on the front to distinguish it.
5.2.3 FPM-SSC 100Mbps single-mode FX-SC-type, “snap-in” connector
The Magnum FPM-SSC is a single-mode 100Mbps fiber optic module
equipped with a dual SC-type connector. It functions as a full fiber optic transceiver to
support single-mode fiber
networks.
The FPM-SSC, when
installed in a Magnum 8000X
hub, supports fiber distances the
same as 100Mbps multi-mode
ports because of the 100Mbps
collision domain limitations, so
it is only practical for use where
single-mode fiber cable is
already installed and must be used.
Note - to support long fiber distance with the Magnum 8000X, use either
10Mbps modules in front ports (which can go up to 2Km), or use a 100Mbps full-
duplex SPM in the bonus port which has no collision domain limits.
The FPM-SSC is equipped with an Activity (A) LED, and LINK(L) LEDs
identical to those of the FPM-MSC. To distinguish the single-mode FPM-SSC from the
multi-mode FPM-MSC, the label “Sgl. M.” is at the top of the faceplate of the FPM-
SSC.
5.2.3a FPM10-SSC, 10Mbps single-mode FL-SC-type, “snap-in” connector
The Magnum FPM10-SSC is a single-mode 10 Mbps fiber optic module equipped with
a dual SC-type connector. It looks the same as the 100Mbps FPM-SSC, but has
lettering “10 Mbps” on the front to distinguish it.
1
ACTIVITY
LINK
2
100BASE-FX, 10BASEFL sgl.mode
SC Connectors
1
2
A L