Filter
Top Products
114
Chapter 7: Upgrading Your Computer
www.gateway.com
7 Slide the new system board into the keyhole slots and lock it into place
with the thumbscrew.
8 Reconnect the power and data cables using your notes from Step 4. See
the system board documentation for more information.
9 Reinstall the add-in cards using the instructions in “Adding or replacing
add-in cards” on page 103.
10 Close the case using the instructions in “Closing the case” on page 95.
Important The new system board must have special standoffs
(pem studs) mounted on the bottom of the board. If
necessary, use the standoffs from the original system
board.