Filter
Top Products
www.gateway.com
45
6 Loosen the thumbscrew (1), then lift the distribution module slightly and move it toward
the front of the case (2) to release it from the three locking tabs.
7 Lift the power distribution board (3) out of the chassis.
8 Insert the new power distribution board into the chassis, then move it toward the back
of the chassis to engage the three locking tabs.
9 Tighten the thumbscrew to secure the power distribution board in the chassis.
10 Reconnect the power cables. See “System board” on page 5 for the location of the
connectors on the system board.
11 Replace the system fan cage and fan duct by following the instructions in “Replacing system
fans” on page 38.
12 Reinstall the PCI riser assembly by following the instructions in “Installing and removing
PCI expansion cards” on page 34.
13 Follow the instructions in “Closing the server case” on page 27.