Filter
Top Products
251
Adding or replacing memory
www.gateway.com
Before working with computer components, follow these guidelines:
■ Avoid static-causing surfaces such as carpeted floors, plastic, and packing
foam.
■ Remove components from their antistatic bags only when you are ready
to use them. Do not lay components on the outside of antistatic bags
because only the inside of the bags provide electrostatic protection.
■ Always hold components by their edges. Avoid touching the edge
connectors. Never slide components over any surface.
Adding or replacing memory
Your notebook uses memory modules called SO-DIMMs (Small Outline Dual
Inline Memory Modules). The modules are available in various capacities and
any module can be placed in the memory bay. Use only memory modules
designed for the Gateway M350 for upgrading your memory.
SO-DIMMs are located in two places inside your notebook. Both SO-DIMMs can
be upgraded. For instructions on upgrading the SO-DIMM located on the
bottom of your notebook, see “Adding or replacing memory in the memory
bay” on page 252. For instructions on upgrading the SO-DIMM located under
the keyboard of your notebook, see “Replacing memory under the keyboard”
on page 255.