260
Chapter 15: Upgrading Your Notebook
www.gateway.com
3 Hold the new or replacement module at a 30-degree angle and press it into
the empty memory slot. This module is keyed so it can only be inserted
in one direction. If the module does not fit, make sure that the notch in
the module lines up with the tab in the memory bay.
4 Gently push the module down until it clicks in place.
Reattaching the keyboard
To reattach the keyboard:
1 Rotate the keyboard toward the LCD panel until the keyboard is
almost face-up.
2 Insert the tabs on the front of the keyboard under the palm rest.
3 Gently press the keyboard down until it is flat all the way across. The
keyboard should easily fall into place. Be careful not to damage the
LCD panel.
Important Use only memory modules designed for the
Gateway M350.
Tabs